Configure your test plan · ddos-simulation.com

Test setup

General information

Choose a clear name, the approved target, and when to begin.

Test name Domain you intend to test ?

Test plan

Command timeline

Choose a scenario or add commands to build the sequence of traffic this test runs.

Ready-made scenarios: Start from a curated test suite and customize it, or add commands individually below.

L7 · Web & Application

Web Application Baseline

Comprehensive application-layer assessment evaluating HTTPS volumetric floods, botnet evasion, slow-connection starvation, and HTTP/2 multiplex stress.

HTTPS Flood Botnet Emulation Slowloris HTTP/2 Rapid Reset

L3/L4 · Network Infrastructure

Network Infrastructure

Low-level transport and protocol stress targeting firewall state table capacity, TCP handshake exhaustion, UDP floods, and network stack resilience.

TCP SYN Flood UDP Flood ICMP Flood TCP Flag Flood

Service visibility

Health checking

Collect safe HTTPS observations while the test is running. Sensible defaults are already set — adjust only if you want finer visibility.

Uses only the verified domain selected above.

Check interval (ms) 1000 ms

Start (seconds before) Stop (seconds after)

Paths to check

Each path is requested over HTTPS on the verified domain, every interval.

Safety controls Optional

Automatic stop criteria

Stop the test automatically when the service crosses a configured threshold.

Evaluated from the health checks configured above.

Stop criteria are optional. If any criterion is met, health monitoring continues for the stop-after window so you can watch the service recover.

Before a test can run

Complete the account requirements

Create a customer account and workspace.
Request a quote so ddos-simulation.com can price, schedule, and prepare your documents.
Verify domain ownership and sign the Rules of Engagement — both required before it runs.

This draft is stored only in this browser. It is not saved or runnable.

Step 1 of 2

Select test command

Choose a recommended essential, filter by objective, or search the full catalog.

⭐ Recommended Essentials Most common starting points

1 Load profile & timing Duration, target rate, and traffic shaping curve

Load Intensity Preset

Start offset (seconds) ? Duration (seconds) ?

Maximum requests per second ? Load curve shape ?

Traffic starts immediately at the target rate and remains steady for the full duration.

Load Curve Preview Constant

0s Rate over time 120s

Total Volume 120,000 requests

Est. Data ~72 MB

Average Rate 1,000 /s

Peak Rate 1,000 /s

2 Command options Technique-specific settings

3 Advanced options Payload, headers, and cache behavior